General information
For price and stock information, please visit the shop url below.
Manual / Support
There is no dedicated manual for the midi controller. That is because the midi controllers are basic and fully midi compliant. Most of the setup therefore needs to be done either in the configurator (see topic lower on the page) or in the vst, software, synth or other device you’re using it with.
For the configurator more information can be found on this page. Also see lower on this page for more information on various other topics.
Technical Specifications
| Material | Diecast ABS |
| Size | 121x94x30mm (depth X width X height) |
| Connection | Micro-USB (Free cable is included) |
| MIDI | MIDI DIN OUT MIDI USB |
| Power | Via Micro-USB The Micro-USB always needs to be connected to a power-source, even when using the MIDI DIN connection. |
| Processor | Raspberry Pi |
| Type of Controls | 12x Potentiometer (fixed reach) 4x Bourns 30mm Faders |
| Control Knobs | Potentiometers have T18 6mm (flower / plum / splined) knobs which are optional. Available options are: – No Knobs – Black Knobs – Mix of various colors knobs |
| Control Faders | Fadercaps are included, only black is available |
Gallery
Video
A video of this controller will be added asap.
Firmware
Explanation how to do it (link to general guide). Thumbnail Photo / Version / Information and Downloads will follow asap.
Configurator / Setup
The setup of the controller can be configured via the online configurator at: https://config.shanteacontrols.com/. For all features of the midi controller that can be changed in the configurator see https://github.com/shanteacontrols/OpenDeck/wiki/Configurable-features
For a general introduction see the use the general OpenDeck configurator post on this website.
Issues
The configuration is different per version of the controller. If you experience any issues which the above information cannot solve, then please contact me via shop@beatsandbuttons.com.